Showing 2 Result(s)

Tips To Increase The Life Of Your Motorcycle

Do not leave the motorcycle on the street if you have the opportunity. This is especially important in the colder times of the year. Inclement weather can damage your bike in the long run. Do not forget to store the motorcycle helmet by keeping it in its cover and in a closed place, away from the sun, heat and corrosive products.

The maintenance is important. Therefore you will have to change the oil periodically and do not forget that the motorcycle consumes more oil when it is hotter. Also check the brake pads, as they are very important, always have your pads ready.

On the other hand, do not forget that you will have to control the pressure of your tires, you will also have to see if there are cracks in its path or if the depth of the tread is adequate.

Also check the oil fluid, coolant, and shock absorbers . All these aspects are essential to extend the life of your motorcycle if they are well cared for. Keep in mind that, in addition, the fork oil must be in optimal condition.

Keep the chain taut and greased. The manufacturer will have engraved the required voltage level on the mechanism. Check it and adjust it regularly, especially before a long trip.

The battery is another point to consider. Don’t forget that you will have to change the battery every two years.

In winter it is important to recharge it so that it is always ready. You will also have to check spark plugs, especially if your motorcycle has already been more than 10,000 kilometers. If you follow these steps your motorcycle will notice it.

Be careful with the battery

It is recommended that you change the battery of your motorcycle every two years, to ensure its longevity. Also, if you don’t use it frequently, you should make use of the circuit breaker, which totally disconnects the battery and eliminates the expense. Otherwise, it may be damaged. If the motorcycle does not have it as standard, installing it is a very good option.

Cleanliness is important

Do not forget that the exterior is also important on your motorcycle and not only in aesthetic terms. With this premise, it is essential to spend a few minutes, from time to time, to cleaning the vehicle, so that it does not spoil.

To do this, use a sponge and avoid, at all costs, scourers, as they can damage the surface, with a fatal result. Also pay attention to soaps and avoid those with components that can be excessively aggressive for the motorcycle.

After contemplating how shiny a good washing session has left your motorcycle, it is the turn to grease the chain, very important for the correct care and operation of the vehicle.

Check the chains

The chain must be tensioned according to what the motorcycle manual says. In addition, it is necessary to check that it is not stretched or worn, which would imply that it must be replaced.

If you are able to detach the links from the rear crown, it is an unequivocal sign that the whole assembly must be changed, and this should be done by a specialized workshop, because surely you will need tools that you rarely have at home.

Finally, a tire with adequate tread and pressure can continue to be a danger if the rubber is “stiff”, which is easily verified by trying to put your finger in it, if it is marked we are going well, if it is impossible or the tire shows cracks and symptoms of having lost elasticity, best to throw it away and fit a new cover. This must also be done in a specialized workshop, because used tires have to be recycled.

Don’t forget the coolant

If you have to change the fluid it is more complex than the oil, but not much more, check if the circuit is level if there have been no faults. If it has heated up, don’t be afraid: take the scooter to the workshop and have it checked for leaks, circuit pressure, condition of the radiator and bleeding the system. But if it goes well, it is enough to check that the liquid in the expander vessel is level . It will be more or less hidden depending on the scooter model; you will have to look in the instruction book how to look at it.…

Continue Reading

Motorcycle Helmet: Tips To Extend Its Usable Life

Impacts and environmental conditions can accelerate the deterioration of a motorcycle helmet .

Younger riders will think that wearing a motorcycle helmet is a “lifelong” obligation. but it is certainly not like that. It was not until 1982 that its use began to be regulated. That year, the use of a helmet became compulsory for users – drivers and passengers – of motorcycles with a displacement of more than 125 cc. And below it, the obligation was only applicable on the road.

Since that distant 1992, the use of motorcycle helmets has become widespread in the motorcycle community, a habit that has contributed to saving many lives. However, the properties of a motorcycle helmet are not eternal. Therefore, if you want to extend the life of your motorcycle helmet , read on!

What Happens If A Motorcycle Helmet Has An Impact?

As you may have seen, the deterioration of the materials due to continuous use, their own mechanical characteristics or environmental conditions determine the useful life of a motorcycle helmet. and also the impacts resulting from a traffic accident or the blows that you may suffer on a day-to-day basis. In both cases, although at first glance it may seem that it has no damage, the damage suffered by the helmet could make it useless.

How Should The Motorcycle Helmet Be Cleaned?

Since we have referred to cleaning the motorcycle helmet , take note of the following recommendations so that it always looks like the first day:

  • If you use the motorcycle daily, try to clean the helmet frequently so that insects and dirt particles do not get “embedded” in the shell and screen. And also after taking a motorcycle trip or after practicing off road specialties such as trial , motocross or enduro.
  • After a rainy day , wipe the helmet with a clean cloth. And with the screen open, let it dry at room temperature. Do not use a hairdryer or place it near heat sources such as stoves, radiators or fireplaces! You could cause the glues used to make the helmet to deteriorate.
  • To clean the exterior of the helmet, you will find specific products on the market. Otherwise, you can use a soft sponge and neutral liquid soap. And also a toothbrush to clean the grates.
  • Being a very delicate part, we must be especially careful with the screen. If we scratch it, it will make it difficult for us to see when we ride a motorcycle. Take it apart, soak it in water with mild liquid soap and clean it carefully.
  • If the inner padding of the helmet can be removed, remove it and wash it with mild liquid soap. It is important to eliminate the sebaceous secretion that the scalp releases and remains impregnated in the padding. In addition, cleaning the inside of the helmet is a hygiene measure to get rid of mites and other potentially allergenic agents.
  • In the event that it is not possible to remove the interior, specialized establishments sell products that are applied to the padding. After letting them act for a few minutes, the interior is wiped dry and that’s it!
  • And when you are not using the helmet, put it in its cover and store it in a closet, face up and resting on a comfortable base. If you are going to store it in a garage or warehouse, make sure it is not near containers that contain gasoline, synthetic paint or solvents so that it does not have an unpleasant smell later.
Continue Reading